- #MACOS SIERRA PATCHER 2.0 MAC OS#
- #MACOS SIERRA PATCHER 2.0 INSTALL#
- #MACOS SIERRA PATCHER 2.0 SERIAL#
You must end up with a single partition on the disk as described in the next step If the target disk is already in APFS format, or if multiple partitions exist, it may be necessary to click Partition and remove these partitions Select your target disk (select the physical disk, not a volume on the disk) and click Erase In Disk Utility, click the View menu and select Show All Devices
#MACOS SIERRA PATCHER 2.0 INSTALL#
Use the arrow keys to select Boot OS X Install from Install macOS High Sierra at the Clover bootloader menu and press Enterįrom the macOS Utilities screen, launch Disk Utility Press F12 at startup to select the USB as your boot disk Place the USB installer in a USB 2.0 port of your computer. It should look like the image here (click to enlarge) →ĭisconnect all drives from your computer except the drive you will be installing macOS on The EFI partition on your USB should now contain a single folder named EFI that contains two folders: BOOT and CLOVER.
Quit Clover Configurator and copy the entire EFI folder from the Utility and Kext Pack to the EFI partition of your USB, replacing the existing folder if present.
It will appear as EFI on EFI, Install macOS High Sierra (disk*s1) Launch Clover Configurator from the Utility and Kext Pack and click Mount EFIĬlick the Mount Partition button to the right of the EFI partition of your USB. Ivy Bridge GA-Z68X-UDH3-B3 macOS 10.13 Utility and Kext Pack Sandy Bridge GA-Z68X-UDH3-B3 macOS 10.13 Utility and Kext Pack Sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia -volume /Volumes/USB -applicationpath /Applications/Install\ macOS\ High\ Sierra.app -no interactionĪfter approximately 25-35 minutes the process will finish and the USB will be renamed Install macOS High Sierra (wait for the “copy complete” message in the Terminal before continuing)ĭownload one of the following packs based on the CPU you are using and place a copy on your installation USB: Open Applications → Utilities → Terminal and enter the following command: Under Scheme: select GUID Partition Map (If the Scheme option is not visible, go to the View menu and select Show All Devices)
#MACOS SIERRA PATCHER 2.0 MAC OS#
Under Format: select Mac OS Extended (Journaled) Select the USB disk in the left pane (select the physical disk, not a volume on the disk) Open Applications → Utilities → Disk Utility
#MACOS SIERRA PATCHER 2.0 SERIAL#
Peripherals → Super IO Configuration → Super IO Chip → Serial Port A = Disabledĭownload the Install macOS High Sierra app from the App Store.Peripherals → SATA Mode Selection = AHCI.BIOS Features → Boot Mode Selection = UEFI Only.BIOS Features → Intel Virtualization Technology = Disabled.*Set to Disabled if your RAM modules do not support Intel XMP → Advanced Memory Settings → Extreme Memory Profile (X.M.P.) = Profile1* → Advanced Frequency Settings → Advanced CPU Core Features → CPU EIST Function = Disabled Press F12 at startup to enter BIOS setup and select the following: See the modified BIOS here if you want to use an NVMe SSD See the guide here if you are updating from a legacy version of the BIOS (version F12 or earlier) Update the BIOS to the latest UEFI version MacOS HIGH SIERRA 10.13.6 INSTALLATION on the GA-Z68X-UD3H-B3įollow these steps to perform a clean installation of macOS 10.13 High Sierra on your GA-Z68X-UD3H-B3 system.
0 kommentar(er)
